BGCLM - SYNTHOLVAR 120/210

  • MSDS: BGCLM
  • Manufacturer: VARFLEX CORP
  • Product Name: SYNTHOLVAR 120/210
  • National Stock Number: 5970-00-997-6347
Product Identification

Product ID:SYNTHOLVAR 120/210
MSDS Date:10/01/1985
FSC:5970
NIIN:00-997-6347
MSDS Number: BGCLM

Responsible Party
VARFLEX CORPORATION
512 WEST COURT STREET
ROME, NY 13440
US

Emergency Phone: 315-336-4400

Info Phone: 315-336-4400

Cage: 79074

Contractor
VARFLEX CORPORATION
ROME, NY 13440 US

Telephone: 315-336-4400

Cage: 79074

Ingredients

PLASTICIZED POLYVINYL CHLORIDE RESIN


ADDITIVES (INCLUDES 5% PIGMENTS)

CAS: 24937-78-8

Fraction By Weight: 5.5%

Hazards

Routes of Entry: Inhalation:NO Skin:NO Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:ACUTE: NONE SPECIFIED BY MANUFACTURER.
CHRONIC: NONE SPECIFIED BY MANUFACTURER.
Explanation of Carcinogenicity:MATERIAL IS NOT CONSIDERED AS A
CARCINOGEN BY NTP, IARC OR OSHA
Effects of Overexposure:NONE SPECIFIED BY MANUFACTURER.
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.

First Aid

First Aid:IF VAPORS FROM HIGH TEMPERATURES ARE INHALED, REMOVE TO FRESH
AIR.

Fire Fighting

Autoignition Temp:Autoignition Temp Text:NONE
Extinguishing Media:WATER
Fire Fighting Procedures:NO SPECIAL REQUIREMENTS.
Unusual Fire/Explosion Hazard:HYDROGEN CHLORIDE GAS LIBERATED DURING
COMBUSTION AND AT 500F AND ABOVE.

Handling

Handling and Storage Precautions:DO NOT EXPOSE TO SUNLIGHT. STORE BELOW
70 DEG. F.
Other Precautions:NONE

Exposure Controls

Respiratory Protection:NONE REQUIRED.
Ventilation:MECHANICAL(GENERAL) RECOMMENDED.
Protective Gloves:NONE
Eye Protection:NONE
Other Protective Equipment:NONE
Work Hygienic Practices:WASH AND SHOWER NORMALLY AT THE END OF A
WORKDAY.
Supplemental Safety and Health
NONE

Chemical Properties

HCC:N1
Decomp Temp:Decomp Text:>500F,>260C
Spec Gravity:1.19-1.41
Solubility in Water:INS.
Appearance and Odor:CLEAR PLASTIC INSULATION SLEEVING, 100 FOOT SPOOL.
NO ODOR.
Percent Volatiles by Volume:0

Stability

Stability Indicator/Materials to Avoid:YES
DIRECT CONTACT WITH SILVER AND COPPER UNDER CERTAIN CONDITIONS CAN
CAUSE CORROSION.
Stability Condition to Avoid:TEMPERATURES OVER 400F.
Hazardous Decomposition Products:HYDROGEN CHLORIDE GAS IS LIBERATED
DURING COMBUSTION AND AT 500F OR HIGHER.

Disposal

Waste Disposal Methods:DISPOSE OF IAW LOCAL,STATE,FED.REGS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.